Triathlon Training – Endurance strength training for runners

Endurance strength training for runnersEndurance runners will benefit more from these strength exercises than with the traditional squats, leg presses, leg extensions and hamstring curls. Mike.

These three strength-training exercises will improve your stride length and frequency

If you’re an endurance runner, should you carry out regular strength-training workouts? Not a single published scientific study has linked resistance training with improved 5-K, 10-K, or marathon times, but running books and magazine articles extol the merits of strength training, and countless runners spend time in the weights room.

Proponents of strength training for endurance runners claim that the activity bolsters muscle power, raises tendon and ligament strength, and lowers the risk of both acute and chronic injuries. On the other hand, critics of the ‘iron game’ point out that most resistance exercises are mechanically dissimilar from running, and they complain that strength-training manoeuvres, most of which require just seconds to complete, can’t possibly promote improved muscular endurance during a sustained, longer-duration activity like a 10-K race or marathon. Sceptics also suggest that weight training may decrease flexibility and produce unproductive increases in muscle mass and overall body weight. They frequently call attention to the fact that highly successful runners tend to be small and reed-thin, the exact antithesis of the strength-trained athlete.

To date, much of the research exploring the link between strength training and endurance performance has focused on standard exercises such as leg extensions and curls, leg presses, and bench and shoulder presses. Along with double-leg squats, these are the same exercises which runners emphasize during their resistance-training workouts. Overall, the exercises do a good job of developing generalized muscle tone and strength, but – despite their popularity – no research has ever determined that they improve endurance-running capability.

In fact, it’s difficult to understand exactly how these standard resistance exercises would promote better endurance performances. Perhaps the bench and shoulder presses would help the marathoner who ‘hits the wall’ at the 20-mile mark and begins running on his hands, but running involves multiple joint actions and forces numerous muscle groups in the hips, legs, ankles, and feet to work concurrently to maintain control and balance, while weight-training tends to focus on isolated muscles and ignores the complex, coordinated motor patterns required for running.

Take a common resistance exercise employed by runners, for example – knee extensions. For this activity, runners remain in a seated position, their hips are relatively immobile, and their ankles are locked in position. True, the quadriceps muscles are active, but they work in almost total isolation from the rest of the leg – the exact opposite of what happens during running. Since knee extensions are totally non-weight bearing and have little specific resemblance to running, some faultfinders have scoffed that this traditional exercise will help you move faster – whenever you attempt to run sitting down!

The point is that knee extensions will make your quads stronger during knee-extension workouts, but they may not make your quads more powerful during a 10K or marathon, when the actual contractions of the quads are of a different magnitude and frequency, and the quads are forced to act in concert with the other muscles in the legs. If you carry out knee extensions, knee flexions, leg presses, and other isolated exercises in hopes of improving your running, you’re as foolish as the symphony-orchestra conductor who works with the percussion, horns, woodwinds, and strings separately during rehearsals but never asks the various elements to play together before an important concert.

Since traditional resistance routines are of doubtful value because of their lack of similarity to running, what kind of strength training should you employ? To answer this question, it’s important to remember that all competitive running events require the development and maintenance of speed over a specified period of time. Running speed is largely dependent on the amount of force applied to the ground during each foot strike – and me time over which that force is applied. The greater the force of a foot strike and the shorter its period of application, the higher the power of an individual step – and the faster the speed of a runner.

By increasing the power exerted during each step, runners raise the speed of their workouts and races. The power requirements for a marathon are lower (and running speeds slower), compared to a 5000-metre race, but both events require optimal power production during each foot strike.

A lot of the power produced during running depends on the mechanical ‘energy-return’ properties of a runner’s feet and legs. The muscles and tendons of the lower extremities act like springs during running, mainly by storing energy just before and during the compression associated with foot strike and then releasing (‘returning’) this energy during take-off. This return of energy is influenced by both the elasticity of the muscles and tendons and by nerve cells which control muscle and tendon stretchiness.

Better nervous-system control of the muscles of the lower limbs should produce higher levels of elasticity and improved energy return. Resistance exercises aimed at improving running performance, therefore, should not just attempt to increase general muscle strength; they should enhance specific activities of the nervous and muscular systems which promote faster, more coordinated movements (see D. Schmidtbleicher’s analysis in ‘Strength and Power in Sport’, edited by Paavo Komi, pp. 381-395, Blackwell Scientific Publications, London).

What’s really needed is specific strength training for runners – exercises that target the muscles and neuronal pathways responsible for actual energy return during running. Although this sounds complicated, it shouldn’t have to be in actual practice, and it isn’t. In the paragraphs that follow, you’ll find three key power-building exercises that are easy to carry out, won’t take much of your time, and will rejuvenate your running – because they replicate key motor movements involved in the process of running.

The power triad

Please perform the three exercises in the order in which they are presented – and only when you are well rested. Specific strength training aims for positive adaptations of the nervous system as well as the muscles. Completing the exercises when you’re over-tired leads to poor neuromuscular coordination and movements that are slower than desirable.

That means that the trio of specific exercises should be completed before a running workout, not after, and in fact the best-possible time is immediately before an interval, economy, or lactate-threshold session, not before a slower workout. While that may sound paradoxical (some might fear that strength training would slow down a subsequent training session), the truth is that positioning the exercises right before your high-intensity workout will help you run faster. In fact, at least five different scientific studies have shown that a high-intensity strength session activates the nervous system, increases the ‘firing rate’ of nerve cells which control muscles, and improves the overall ‘recruitment’ of muscle fibers during a workout (see Paavo Komi’s ‘The Stretch-Shortening Cycle and Human Power Output,’ in L. Jones, N. McCartney, and A. McComas, eds., Human Muscle Power, pp. 2742, Human Kinetics, Champaign, Illinois).

One final caution: perform the third exercise, ‘One-Leg Hops in Place,’ only on an aerobics floor, wooden gym floor, grass, a rubberized track, or any resilient surface which offers some ‘give’. Hopping repeatedly on concrete or asphalt may increase the risk of overuse injuries to the lower leg and shin.

(1) The high-bench step-up: This exercise strongly develops the hamstrings, with complimentary development of the gluteals (the ‘buttock’ muscles) and the quadriceps. Simply begin from a standing position on top of a high bench (approximately knee height), with your body weight on your left foot and your weight shifted toward the left heel. The right foot should be free and held slightly behind the body. Lower the body in a controlled manner until the toes of the right foot touch the ground, but maintain all of your weight on the left foot. Return to the starting position by driving downward with the left heel and straightening the left leg. Repeat for the prescribed number of repetitions as shown in the training programme, and then switch over to the right leg. Maintain absolutely upright posture with the trunk throughout the entire movement, with your hands held at your sides (with or without dumbbells).

(2) One-leg squat: This exercise strongly develops the quadriceps and gluteals, with a complimentary boost to the hamstrings. To complete one-leg squats in the correct way, stand with the left foot forward and the right foot back, with the feet about one shin-length apart (your feet should be hip-width apart from side to side). Place the toes of the right foot on a block or step which is six to eight inches high. As in the step-up exercise, most of the weight should be directed through the heel of the left foot. Bend the left leg and lower the body until the left knee reaches an angle of 90 degrees between the thigh and lower leg. Return to the starting position, maintaining upright posture with the trunk and holding your hands at your sides. Complete the prescribed number of repetitions with the left leg before switching to the right leg.

(3) One-leg hops in place: This exercise builds strength and coordination in the entire lower extremity, including the foot, ankle, shin, calf, thigh, and hip. The resilient, bouncy nature of the exercise makes it the most specific of the three – extremely close to the actual movements involved in running. Simply start from the same position you used for the one-leg squat, with the toes of the right foot supported by a six- to eight-inch block. Hop rapidly on the left foot at a cadence of 2.5 to 3 hops per second (25 to 30 foot contacts per 10 seconds) for the prescribed time period as shown in the training programme. The left knee should rise about four to six inches, while the right leg and foot should remain stationary. The left foot should strike the ground in the area of the mid-foot and spring upwards rapidly – as though it were contacting a very hot plate on a cooker. The hips should remain level and virtually motionless throughout the exercise, with very little vertical displacement. After hopping for the indicated time on the left leg, switch to the right leg and repeat the exercise.

Why hop on one foot instead of bounding from foot to foot, as runners usually do during their drills? For one thing, it’s very difficult to move fast while you are bounding, so bounding is not very much like sizzling through a 5-K or 10-K race. By contrast, you can move very quickly during the one-leg hops, so your power expands dramatically and your coordination during high-speed running improves greatly. Eventually you’ll learn to move more quickly and efficiently. Research carried out by Russian scientists indicates that one-leg hopping is far superior to bounding at inducing improvements in leg speed (‘Muscles and the Sprint,’ Legkay Atletika, No. 5, pp. 8-11, 1992, cited in Fitness and Sports Review International, pp. 192-195, December 1992).

For similar reasons, the one-leg squat is superior to runners’ traditional exercise – the two-legged squat. While a much greater load can be hoisted on the shoulders during a two-legged squat, that weight is distributed through two legs, not one, so the actual resistance per leg is often less. In addition, the trunk of the body is often inclined significantly forward in a two-legged squat but remains nearly vertical in a one-leg effort, so the latter more closely parallels the form required for running. Plus, for purposes of maintaining balance, the feet are often angled outward during the two-leg squat, which is unnatural to running, while the feet point straight ahead during a one-leg effort. Overall, the one-leg squat has the added advantage of being safer, since less total weight is used.

Overall, the strength-building triad carries little risk of injury, takes little of your time, and is very specific to the actual act of running. The three exercises will improve both your coordination and leg-muscle power, and after several weeks you’ll notice that your legs feel much stronger and that your stride length and frequency have improved. You’ll move quickly and aggressively from one foot to the other as you run, and you’ll reach the finish lines of your races in faster and faster times.

Walt Reynolds, C.S.C.S.

This article was taken from the Peak Performance newsletter, the number one source of sports science, training and research. Click here to access these articles as soon as they are released to maximise your performance

Triathlon Training – The role of stretching in sports performance

Stretching 4I’ve been an ardent fan and advocate of stretching routines since I started going to the gym in 2003, and so would never have thought that my knowledge of the subject could be considered so inadequate, until I read this article… Mike

What science has to say about the performance benefits of stretching and flexibility exercises

Flexibility training, or stretching, is used in varying forms by practically every coach, athlete and physiotherapist on a regular basis. That is to say, a form of stretching is likely to take place at some point in every training or therapy session. In spite of this, flexibility training is probably the least understood of all the fitness components, in terms of its scientific basis. This article will discuss the latest research findings and recommendations to explain why and how stretching should best be carried out

What does it mean?

Flexibility is defined as the static maximum range of motion (ROM) available about a joint. The largest limiting factor of static ROM is the structure of the joint itself. Thus, even after endless stretching exercise, there will be a limit as to how much movement is available. In addition, joint structures can vary between individuals, and this must be recognised when assessing flexibility standards in athletes. Most of the variability in static ROM is due to the elastic properties of the muscle and tendons attached across the joints. ‘Stiff’ muscles and tendons reduce the ROM while ‘compliant’ muscles and tendons increase ROM. It is these elastic properties that are altered after stretching exercises. When a muscle is held for some times under tension in a static stretch, the passive tension in the muscle declines, ie, the muscle ‘gives’ a little. This is called a ‘viscoelastic stretch relaxation response’. Passive tension is defined as the amount of external force required to lengthen the relaxed muscle. Obviously, the less external force required, the more pliable the muscle. This increased pliability is maintained for up to 90 minutes after the stretch (Moller et al, 1985)

In the long term, regular static stretching will bring about permanent increase in static ROM, which is associated with a decrease in passive tension. Experimentally, this was shown by Toft et al (1989), who found a 36% decrease in passive tension of the plantar flexors after three weeks of regular calf stretches. The relationship between static ROM and passive tension has been further supported by McHugh et al (1998). These researchers demonstrated that maximum static hip flexion ROM was inversely correlated with the passive tension of the hamstrings during the mid-range of hip flexion. This suggests that the ease with which the muscle can be stretched through the mid-ROM is increased if the maximum static ROM is improved. The concept that increased static ROM results in more pliant mechanical elastic properties of the muscle suggests that static stretching is beneficial to sports performance
Stretching 7

Flexibility and performance

Research into the effects of flexibility of stretch-shortening cycle (SSC) movements (plyometrics) has shown that increased flexibility is related to augmented force production during SSC movements. In contrast, running studies have shown that flexibility has little performance effect, which is odd because running is a kind of SSC movement. For example, De Vries (1963) showed that while pre-stretching increased static ROM in sprinters, it had no effect on speed or energy cost during the 100-yard dash. Interestingly, it has been shown that stiffer leg muscles in endurance athletes may make them more economical in terms of oxygen consumption at sub max speeds

The reason for these converse findings is probably related to the principle of specificity, which seems to underlie all sports training. The sprints and running studies above compared static ROM and stretches with performance, while the
SSC research compared active stiffness with performance. Holding a maximum static stretch, and reducing passive tension, is a completely different mechanical action to those practised in actual sports, where joints are moving at fast speeds and muscles are contracting while they are changing length. Thus static ROM may not be an appropriate flexibility measurement to relate to performance. On the other hand, active stiffness is a measurement of the force required to stretch a previously contracted muscle, and is therefore more sports-specific. It seems logical that the ease with which a contracted muscle can change length will have an impact on the performance of an SSC movement, so active stiffness is a more appropriate parameter to measure flexibility for sports performance.

Along the same lines, Iashvili (1983) found that active ROM and not passive ROM was more highly correlated with sports performance. In this instance, active ROM is defined as the ROM that athletes can produce by themselves, which will usually be less than the passive ROM, which is the maximum static ROM available when assisted manually or by gravity. For example, active ROM would be the height an athlete could lift his or her own leg up in front using the hip flexor muscles, whereas the passive ROM would be maximum height the leg could be lifted by a partner. Athletes must be able to generate the movement themselves, and this suggests that for improving sports performance it is active ROM that should be developed and not passive ROM. A sprinter must have enough active ROM in the hip flexors and hamstrings to comfortably achieve full knee lift and full hip extension at the toe-off point of the running gait to ensure a good technique and full stride length. Arguably, any further passive static ROM developed through passive
static stretching will not provide any extra benefit, especially since the joint angular speeds during sprinting are very high.

How to improve active ROM

The research suggests that, to improve sports performance, active stiffness should be reduced and active ROM should be improved. This will be more specific than static stretches which reduce passive tension, since sports involve both movement and muscular contractions. Unfortunately, I have found no studies looking at training methods to reduce active stiffness, but one can assume that they will be similar to the methods used to improve active ROM. Alter (1996) suggests that the active ROM can be improved by any kind of active movement through the available active range of motion. For instance, weight-training exercises have been shown to improve active ROM (Tumanyan & Dzhanya, 1984). Ballistic stretches will also develop the active ROM and are endorsed by sports coaches because they have the advantage of being executed at sports-specific speeds. But ballistic stretches must be performed with extreme caution, or they can cause muscle or tendon-strain injuries. If you use them, make sure you begin slowly and with a small ROM, building up speed and full ROM only towards the end.

It seems that, as with endurance, strength and speed training, flexibility training follows the specificity principle. This means that if you want to improve your ability to actively move through a full ROM, then active and ballistic mobility exercises, and not static stretching, are the answer. This supports the use of exercises employed by swimmers and runners during their warm-up routines, such as shoulder circles, bum kicks and high-knee skips. These exercises actively take the joints through their available ROM and thus help to prepare them and the muscles to be more pliable during the subsequent activity. Modern coaching techniques advocate the use of dynamic active mobility exercises as essential components of a warm-up routine in the belief that this kind of exercise will be more beneficial to sports performance and less likely to cause injury than static passive stretches. Unfortunately there is little research to support this. Nevertheless, based on the fact that these exercises will be more specific than static stretches and that, through experience, I have found them to be very beneficial, I would strongly recommend them.

Let’s take a specific example. To warm up the lower leg before any kind of running activity, I would first walk 20 yards on the toes with straight legs to warm up the calves, then walk on the heels 20 yards to warm up the dorsi flexors. I would then do 20 ankle flexion exercises with each leg. This involves holding one leg up so the ankle is free to move, first fully flexing the ankle bringing the toes right up and then fully extending the ankle pointing the toes away. Start slowly and then speed the movement up, so you flex and extend quickly throughout the full range of motion. This would be an open-chain exercise.

The next exercise would be to walk with an exaggerated ankle flexion extension, pulling the toes up on heel contact and pushing right up on to the toes at toe-off. Then finally, do the same while skipping, ensuring the full ankle movement is performed at sports-specific speed. The same rationale can be applied to the knee, hip and shoulder, warming up each joint by taking it through the full range of motion, first slowly and then fast, using both open and closed kinetic chain exercises which are specific to your sport. If you perform these kinds of exercises regularly, you should find that, as well as providing an effective warm-up, they will improve your active ROM and specific mobility patterns during sport.
Stretching 6

Injury and flexibility

The well-established general rule is that insufficient ROM, or stiffness, will increase muscle-strain risks. More specifically, athletes in different sports have varying flexibility profiles and thus varying flexibility needs in order to avoid injuries. Gleim & McHugh et al (1997) review various studies relating flexibility measures or stretching habits to injury incidence. Studies of soccer players show that flexibility may be important for preventing injuries. For example, one study showed that those who stretched regularly suffered fewer injuries, while another showed that tighter players suffered more groin-strain injuries, and a third showed a relationship between tightness and knee pain.

These findings seem to confirm the correlation between muscular tightness and increased muscle-strain risks. Yet studies of endurance runners have not shown the same results. For instance, in one famous study by Jacobs & Berson (1986), it was found that those who stretched beforehand were injured more often than non-stretchers. Other running studies have found no relationship whatsoever between flexibility or stretching habits and injury. On the other hand, one study of sprinters found that 4° less hip flexion led to a greater incidence of hamstring strain. The reason for these apparently contradictory findings is the specific nature of each sport. With endurance running, the ankle, knee and hip joints stay within the mid-range of motion throughout the whole gait cycle and therefore maximum static ROM will have little effect. Sprinting and football involve movements of much larger ROM and so depend more heavily on good flexibility

There are other established biomechanical relationships between flexibility and injury. For example, ankle ROM is inversely related to rear foot pronation and internal tibia rotation. In other words, tight calf muscles are associated with greater amounts of rear foot pronation and lower-leg internal rotation. In excess, these two factors can lead to foot, lower-leg and knee problems. Poor flexibility in the hip flexor muscles may lead to an anterior pelvic tilt, where the pelvis is tilted down to the front. This increases the lumbar lordosis, which is the sway in the lower back. This in turn can lead to a tightening of the lower-back muscles and predispose the back to injury

Similarly, tight pectoral muscles can lead to a round-shouldered upper-back posture called kyphosis. During throwing and shoulder movements, this forward alignment of the shoulder can increase the risks of shoulder-impingement problems. A flexibility/injury relationship also exists for young adolescents. During the pubertal growth spurt, the tendons and muscles tighten dramatically as they lag behind the rapid bone growth. For young athletes this poor flexibility may lead to injury problems, especially tendinitis-type injuries such as Osgood Schlatters. Thus regular stretching is essential for young athletes. Remember it is biological age that counts, so children in the same team or squad may need to pay extra attention to flexibility at different times

Don’t overdo it!

As a general guide, when it comes to preventing injury, one should make sure that athletes have a normal ROM is all the major muscle groups and correct postural alignment in the back. For instance, hamstring mobility should allow for 90° of straight-leg hip flexion. Any further ROM should be developed only if analysis of the sport’s movements suggests that extra mobility is required. The obvious example is gymnastics, where contestants must perform movements with extreme ROMs. A footballer who developed the kinds of flexibility a gymnast needs would be at greater risk of injury since hypermobile joints become unstable. This relationship has been shown in American football players, with those who have over-developed hamstring flexibility suffering more from ACL strain. A likely reason is that the flexible hamstrings allow the knee to hyperextend more readily.

So the general rule regarding the relationship between flexibility and injury is that a normal ROM in each muscle group will protect against injury. However, specific movements in each sport that require extra ROM will need extra flexibility development to guard against injury. This may mean that an endurance runner’s hamstring ROM may be less than a sprinter’s, while a sprinter may not need such a large ROM in the groin as a tennis player, whose sport demands large lateral lunging movements. Extreme ROMs should only be developed out of necessity, since they lead to higher joint-injury risks, just as small ROMs lead to higher muscle-strain risks

What type of stretches?

The job of the coach and therapist is to know the normal ROM for each muscle group and to ensure the athlete achieves and maintains these standards. Christopher Norris’s book (see references) describes in detail how to assess posture and flexibility in all major muscles and should be used as a guide. If any extra flexibility in specific muscles for specific movements is required, then this should also be developed. To develop flexibility, research suggests (see Alter, 1996) that static stretches should be held for at least 20 seconds, possibly up to 60 seconds, to gain a benefit. The stretches should also be performed regularly, ideally twice a day, every day. Stretches should not be painful, and should not cause the muscle to shake. Instead, one should feel a mild-intensity stretch and maintain that position. If the tension eases, taking the stretch a little further and holding the new position will help gains in ROM.

Using partner-assisted stretches and PNF stretching will also produce the same effect. PNF stretches involve applying an isometric contraction against the stretch to invoke a greater relaxation response and thus enable further ROM to be reached. The protocol is for the partner to take the stretch to the initial end point and hold that position. After about 20 seconds, the athlete opposes the position with a strong 10-second isometric contraction pushing against the partner. The athlete then relaxes, breathes out, and the stretching muscle should relax, allowing the partner to take it further. This is repeated. Some research has shown that PNF stretches are very effective, although one very recent study by Golhofer et al (European Journal of Applied Physiology, 1998, 77: 89-97) casts doubt on this. These researchers found that while there was a relaxation response post-isometric contraction, it only lasted for a very short time, and so no real benefit was gained.
Stretching 8

Getting the mechanics right

Regardless of whether you choose conventional or PNF stretches, by far the most important factor for stretching effectiveness is to choose an exercise with the correct mechanics. The purpose of static stretches is to improve or maintain the ROM of a particular muscle, and the mechanics of the exercise must ensure that the target muscle is being stretched effectively.

For example, a popular, if old-fashioned, way to stretch the hamstrings is to perform a touch-toes stretch. However, the touch-toes position requires lower-back flexion, which leads to a change in pelvic position, and so the effectiveness of the stretch for the hamstrings is compromised. The mechanically correct way to isolate the hamstrings is to place one foot slightly in front of the other, leaning forward from the hips and keeping the back arched. Supporting your weight with your hands on the rear leg, you should then feel the stretch in the front leg. This position ensures the back does not flex and the pelvis remains tilted forward, so the hamstrings are lengthened optimally. Try the two different positions for yourself and you should feel a significant improvement in hamstring stretch. You may even find that by keeping your back in a strict arch you may not need to lean forward very far to achieve an effective hamstring stretch.

The message here is that you must ensure that any static stretching exercise you perform allows the target muscle to be lengthened effectively, without being limited by other structures. The mechanics of the stretch should also ensure that the athlete is stable and that there are no undue stresses on any of the joints. For example, the hurdles stretch places a strain on the medial ligaments of the knee and is no longer recommended. Similarly, with the hamstring stretch discussed above, it is important to support one’s weight with the hands on the rear leg so that the lower back is protected – leaning forward unsupported from a standing position places a great strain on it (see both Norris, 1998, and Alter, 1996, for safe and effective stretches for all muscle groups)

The bottom line?

There is still much to be researched about stretching methods before all the definitive answers can be given. However, it is probably fair to say that some of us need to look again at certain stretching techniques and ask why we do them. In particular, static stretching as part of a warm-up is very common, and yet the research, and logic, suggest that static stretches will do little to help prevent injuries or improve muscle function before an activity. Instead, active mobility exercises, those that take the muscles dynamically through the full ROM, starting slowly and building up to sports-specific speeds, are more appropriate, both pre-exercise and generally to develop active ROM for sports performance.

The role of static stretches is separate from the active flexibility exercises. Rather than as part of a warm-up, static stretches are necessary to develop the correct maximum static ROM that is needed to avoid muscle-strain injuries. Thus static stretches should be used either after training, when the muscles are warm, or in a separate context. These stretches must be effective, safe and stable in terms of their mechanics. As mentioned, a normal ROM in all muscle groups, plus any sports-specific ROMs, should be developed or maintained with static stretches following the above guidelines. If flexibility is well below normal, then PNF stretches may be considered to improve flexibility more quickly

Some of you may not agree with my conclusions about the role of the different types of stretching. However, I ask you to consider carefully the specificity principle of training and apply that to flexibility in the same way as you would to strength. For instance, no one would consider using only isometric contractions to develop strength in athletes. Instead, coaches try to devise strength exercises that are as specific as possible, both in terms of speed and mechanics, to the sports-specific condition. That said, why do so many people use only static stretches at the maximum ROM to develop flexibility for sport which involves active motion through various ROMs depending on the movements?

For further reading, you will find most of the references discussed, and more, in the list of recommended books and articles that accompanies this one

Raphael Brandon

This article was taken from the Peak Performance newsletter, the number one source of sports science, training and research. Click here to access these articles as soon as they are released to maximise your performance

Triathlon Training – Managing Arrhythmia Part 2

Heart NodesToday is an extremely sad day for me…

My waking HR is still all over the place for the last 3 days now – 32bpm to 119bpm. Further research indicates that the drug Verapamil may not always be the way to go in treating arrhythmia, and in fact in the long term may even worsen the condition and increase the likelihood of sudden cardiac death!

I stopped taking the medication and re-evaluated the situation.

My heart specialist also indicated that one or two months of “de-training” may well sort out much of my ventricular bigeminy (low HR).

I feel this should now be my first course of action.

I also have SVT (Supraventricular Tachycardia) causing in my case fast HRs up to 240bpm (or more), and the only alternative other than the unacceptable drugs would require heart surgery involving cryoablation (freezing) of heart tissue around the SA / AV nodes that are responsible for the extra signals and high heart rates.

http://en.wikipedia.org/wiki/Supraventricular_tachycardia

I feel this should be my second course of action (medical aid permitting).

As today is the last day for 70.3 late registrations, I decided that it would be very unwise for me to continue with training for this and IM 2010 until my heart conditions have been properly sorted out.

So basically that’s it for now. I will be spending the next two months trying to get a lot of rest and doing  only light short duration stuff (not more than once a day), and a lot of that mainly Pilates and Yoga. During this time I will also see to getting the surgery done if and when possible.

There is still 2011…